Gray, white & other colors
PACKAGING: 2.5Kg, 10Kg, 20Kg
CONSUMPTION RATE: 500 – 700 (g/m²)
RECOMMENDED COATING AMOUNT: 2 Coats
STORAGE: Can be stored up to 1 year in dry places.
Must be kept away from freezing and direct sunlight.
DESCRIPTION: An acrylic emulsion based decorative plaster with a natural gross concrete appearance.
Product is recommended for interior use.
APPLICATION AREAS: Applicable to surfaces of rough plaster, concretemineral surfaces, gypsum plaster, gypsum board, plywood and old paintedsurfaces.
SURFACE PREPARATION: Dirty, dusty and loose textured surfaces should be cleaned. Cleaning should continue until the surface salts are removed. On old painted and new painted surfaces, a coat of primer should be used beforehand.
APPLICATION: The product should be mixed until it becomeshomogeneous.Thinning can be done with water to achieve the desired consistency. Once the primer application has dried, apply a single coat with a steel trowel. After the first layer of the application is done, wait 5-6 hours at room temperature before applying the second coat, again with the help of a steel trowel. In order to achieve the desired effects and thicknesses, the trowel should be used for various effects/thicknesses.
DRYING TIME: At 23°C, touch dry time is 24 hours.
Full drying time is between 48-72 hours.
CONSUMPTION RATE: Depending on the surface structure, the theoretical consumption rate for a single coat application: - The coating consumption for an area of 1 m² area is 500-700 gr.
SAFETY WARNINGS: R20-21-22: Harmful by inhalation, in contact with skin and if swallowed. Q2: Keep out of the reach of children. S24-25: Keep away from contact with skin and eyes. S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.